Caring for Your Captain Spalding Sticker
The Captain Spalding vinyl sticker brings a limited-edition, handcrafted horror design to your everyday gear. To keep the glossy, water-resistant print looking its best, a little care goes a long way. This guide covers placement, cleaning, and handling so you can enjoy the sticker as long as possible.
What Makes This Sticker Different
- Captain Spalding Vinyl Sticker: Limited edition digitally designed and handmade Captain Spalding sticker printed on glossy water-resistant adhesive vinyl sticker paper. The glossy water-resistant coating protects the sticker from light moisture and everyday wear, but the handmade nature means each sticker is unique.

Captain Spalding Vinyl Sticker - Captain Spalding Vinyl Sticker: This sticker is easy to peel and can be moved 1-2 times before stickiness wears. You have a small window to reposition the sticker during application, but after 1-2 moves the adhesive won't hold as well.
- Captain Spalding Vinyl Sticker: Sticker sizing is: 2 x 3.5 inches The compact size fits well on laptops, water bottles, notebooks, and other flat surfaces without overwhelming the design.
Where to Place Your Sticker for Best Results
- Laptops and hard plastic cases: Smooth, non-porous surfaces give the vinyl adhesive the best grip and make it easy to clean around the sticker.
- Water bottles and reusable cups: The water-resistant vinyl can handle occasional splashes, but avoid fully submerging the sticker or scrubbing it directly.
- Notebooks and journals: Paper covers work well, but the sticker will adhere less firmly to textured or soft covers. Press down firmly after applying.
How to Apply and Reposition the Sticker
Start with a clean, dry surface. Wipe away dust and oils so the adhesive can bond fully.
Peel the sticker from its backing slowly. If you need to adjust the position, lift it gently and press it down again. You have 1-2 repositioning attempts before the stickiness weakens.
Once in the final spot, press the sticker from the center outward to remove air bubbles. A credit card or similar flat edge helps smooth the vinyl without scratching.
- Clean the surface: Use a mild soap or alcohol wipe to remove grease and dust. Let it dry completely.
- Peel and position: Peel the sticker from one corner. Place it on the surface, then press down from the center outward.
- Smooth and set: Use a flat edge to push out any trapped air. Let the adhesive bond for a few hours before heavy use.
Cleaning the Sticker Over Time
To keep the glossy finish clean, wipe the sticker gently with a damp cloth. Avoid soaking the sticker or using abrasive sponges, as the vinyl coating can scratch. For stubborn spots, a tiny drop of mild dish soap on a soft cloth works well. Pat dry with a lint-free towel.
What to Avoid
Do not place the sticker in a dishwasher, washing machine, or direct prolonged sunlight. While the vinyl is water-resistant, it is not designed for high heat or strong detergents. Avoid stretching the sticker during application, as the adhesive may lose contact with the surface.


